Diferencia entre revisiones de «Juan Gonzalez:Tesis»

De WikiRobotics
Saltar a: navegación, buscar
(Simulaciones)
(Noticias)
Línea 214: Línea 214:
  
 
== Noticias ==
 
== Noticias ==
 +
* '''16/Dic/2008''': Simulación de [[MiniCube|Minicube-1]]
 
* '''12/Dic/2008''':  
 
* '''12/Dic/2008''':  
 
** Simulación del robot [[Cube Revolutions]]
 
** Simulación del robot [[Cube Revolutions]]

Revisión del 21:27 15 dic 2008

Robótica Modular y Locomoción: Aplicación a Robots Ápodos

Preface by Dave Calkings

Snakes aren't the kind of cuisine most people look for when ordering, but the speciality of the house was Juan González-Gómez's amazing servo-driven snakebot. All snake robots I've ever seen --even Gavin Miller's amazing bots- cheat. They replicate a snake's motion, be it sinusoidal, caterpillar, or side-winding, but always with wheels on the bottom to eliminate friction and help the bot along. Gonzalez, however, perfected a system that most closely replicates how snakes really move. There are no wheels on his robots. Just his own servo housings. Watching a snake robot skitter across the floor is always cool. But when you pick up Juan's bot and realize that it's got no wheels and can still move the same way any snake can, you're truly awed. Even more inspiring is the fact that his bots are totally modular. You can have as few as two modules or as many as 256 -- good for both garter snakes and anacondas.

Dave Calkins
President of the Robotics Society of America,
Lecturer of the Computer Engineering Program at San Francisco State University
Founder of ROBOlympics/RoboGames - the International all-events robot competition

Resumen

Tesis resumen fig1.png

Esta tesis se enmarca dentro del área de la locomoción de robots modulares y se centra específicamente en el estudio de las configuraciones con topología de una dimensión, que denominamos robots ápodos. El problema a resolver es cómo coordinar el movimiento de las articulaciones de estos robots para que puedan desplazarse tanto en una como en dos dimensiones.

Uno de los grandes retos es el desarrollo de un robot lo más versátil posible que sea capaz de desplazarse de un lugar a otro por diversos terrenos, por muy escarpados y abruptos que sean. Esto tiene especial interés en las aplicaciones en las que el entorno no es conocido, como la exploración de las superficies de otros planetas, navegación en entornos hostiles o las operaciones de búsqueda y rescate.

Para aumentar la versatilidad en la locomoción, la robótica modular propone la creación de robots a partir de unos módulos básicos. Cada configuración tendrá unas características locomotivas diferentes que deben ser estudiadas. Si además los módulos son autoconfigurables, los robots podrán seleccionar en cada momento la configuración más óptima para cada entorno.

Tesis resumen fig2.png

Un tipo de controladores empleados son los bioinspirados, basados en CPG (Central pattern generators), que son unas neuronas especializadas que producen ritmos que controlan la actividad de los músculos en los seres vivos. En estado estacionario se comportan como osciladores de frecuencia fija lo que permite sustituirlos por un modelo simplificado formado por generadores sinusoidales. La ventaja es que son extremadamente sencillos de implementar y se requieren muy pocos recursos para su realización. Además, se pueden materializar usando diferentes tecnologías: software, circuitos digitales o incluso electrónica analógica.

En esta tesis establecemos una clasificación de los robots modulares según su topología y tipo de conexionado y planteamos la hipótesis de emplear generadores sinusoidales como controladores para la locomoción de los robots ápodos modulares con topología de una dimensión, de los grupos cabeceo-cabeceo y cabeceo-viraje. Los resultados muestran que este modelo simplificado es viable y los movimientos conseguidos son muy suaves y naturales. Los robots se pueden desplazar al menos utilizando cinco modos de caminar diferentes. Algunos de ellos, como el de rotación, son novedosos y no habían sido previamente estudiados ni implementados por otros investigadores, a nuestro leal saber.

Tesis resumen-fig3.png

Otro problema planteado es el de las configuraciones mínimas. Encontrar los robots de los grupos de estudio con el menor número posible de módulos y que se pueden desplazar en una y dos dimensiones. Se han encontrado las dos configuraciones mínimas capaces de ellos y las relaciones entre sus parámetros.

Se ha demostrado que las soluciones encontradas al problema de la coordinación son válidas para su utilización en robots reales. Han sido probadas en cuatro prototipos de robots ápodos construidos a partir de la unión de los módulos Y1, diseñados específicamente para esta tesis. La verificación para robots con diferente número de módulos se ha realizado utilizando el simulador desarrollado.

Por último se ha resumido el conocimiento sobre la locomoción de los robots ápodos de los grupos de estudio en 27 principios fundamentales.

Abstract

Title: MODULAR ROBOTICS AND LOCOMOTION: APPLICATION TO LIMBLESS ROBOTS


This dissertation discusses the locomotion of modular robots. It is focused specifically on the study of 1D topology configurations (called snakes or limbless robots). The problem to solve is how to coordinate the joint’s movement so that modular robots can move both in one and two dimensions.

A big challenge in robotics is the development of a very versatile robot with the full capability of moving on different terrains. This is especially important in applications where the environment is unknown in advance, such as the exploration of other planet’s surfaces, navigation in hostile environ- ments and search and rescue operations.

Modular robotics offers the promise of increasing the versatility in locomotion by means of building robots from basic modules. Each configuration has its own locomotive characteristics that should be studied. If the robots have the ability to be self-reconfigurable, then they will be able to change their shapes and topology in order to select the best gait for every terrain and negotiate with different tasks.

One kind of bio-inspired controllers for mobile robots used in the last decade are based on CPG (Central pattern generators), which are a specialized neurons that produce rhythms for controlling the muscle activities of animals. In the steady state CPG behave like fixed-frequency oscillators. For that reason, they can be replaced by a simplified model like sinusoidal generators. The main advantage is that they are extremely simple to implement and requires very few computing resources. Therefore, they can be implemented in low-end inexpensive microcontrollers. Moreover, the generators can also be realized directly as hardware components using either digital or analog electronics.

In this dissertation a general classification of modular robots is established based on their topologies and types of connection. The hypothesis of using sinusoidal generators for controlling the locomotion of 1D pitch-pitch and pitch-yaw modular robots of any length is raised. The results show that this sim- ple model is efficient and the gaits obtained are natural and smooth. It is shown that at least they can move in five different movements. Some of them are totally new and have not been previously studied or implemented by other researchers, from the best of our knowledge. In addition, the relationships between the generator’s parameters and the robot kinematics have been obtained.

Another problem is to find the minimal configurations for locomotion, which are the modular robots within the studied groups that have the minimum number of modules and are still capable of moving in one and two dimensions. This problem has been solved and the two minimal configurations are presented. Their kinematics models are studied throughout too.

The experiments confirm that the solutions found to the coordination problem are valid for the loco- motion of real mobile modular robots. Four kinds of modular robotic prototypes have been built using the identical Y1 modules, which have been designed specifically for this thesis.

Finally the knowledge about the locomotion of pitch-pitch and pitch-yaw connecting modular robots has been summarized in 27 key principles.

Licencia

Cc logo.png This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Spain License.

Descargar

Documentación

Fichero Descripción
Tesis-Juan-Gonzalez-Gomez.pdf Tesis, en formato PDF
Tesis-JGG-fuentes.tar.gz Fuentes de la Tesis. Hecha con Lyx 1.4.3. Dibujos con Inkscape 0.44
tesis-JGG-transparencias.pdf Transparencias de la presentación, en formato PDF
Tesis-JGG-transparencias-src.odp Fuentes de las transparencias. Hechas con OpenOffice 2.0.4
Tesis-JGG-transparencias-figuras.zip Fuentes de las figuras de la presentación. Hechas con Inkscape 0.44

Informes

Nombre Descarga
Prof. Dr. Eduardo Boemo Scalvinoni (PDF ) (ODT)
Prof. Dr. Francisco Gómez (PDF )
Prof. Dr. Jianwei Zhang (PDF ) (ODT)
Prof. Dr. Andrés Pérez-Uribe (PDF )

Prototipos construidos

Modulo-y1-peq.png Cube-rev-cobra-peq.png Hypercube-mesa-euro-peq.jpg Minicube-PP-PYP-star3-peq.jpg
Modulos y1 Cube Revolutions Hypercube MiniCube

Videos

Experimentos con robots reales

Cube-rev-sin2-thumb.jpg Minicube-1-thumb.jpg Hypercube-loc-cap-thumb.jpg Minicube-2-thumb.jpg
VER VIDEO

Locomoción en 1D

VER VIDEO

Locomoción en 1D
Configuración mínima

VER VIDEO

Locomoción en 2D

VER VIDEO

Locomoción en 2D
Configuración mínima

Simulaciones

Tesis-simulacion1.jpg VER VIDEO

Simulación de la locomoción en línea recta de un robot ápodo de 32 módulos del grupo cabeceo-cabeceo

PY-cont-gaits-thumb.jpg VER VIDEO

Simulación de la locomoción en 2D de un robot ápodo de 32 módulos del grupo cabeceo-viraje. Se muestran los 8 tipos de modos de caminar encontrados mediante algoritmos genéticos

Cube-Revolution-Sim1-thumb.jpg VER VIDEO

Simulación del robot Cube Revolutions (8 módulos, grupo cabeceo-cabeceo). Se muestran la variación en la locomoción del robot al aplicar diferentes parámetros.

Hypercube Sim1 thumg.jpg VER VIDEO

Simulación del robot Hypercube (8 módulos, grupo cabeceo-viraje). Se muestran diferentes modos de locomoción.

Pp-Sim1-thumb.jpg VER VIDEO

Simulación de la configuración mínima Minicube-I (2 módulos, grupo cabeceo-cabeceo)

Cuaderno de Bitácora

Noticias

  • 16/Dic/2008: Simulación de Minicube-1
  • 12/Dic/2008:
  • 10/Dic/2008: Añadido video de la simulación de la locomoción en 2D
  • 08/Dic/2008: Añadido video de la simulación de la locomoción en 1D
  • 04/Dic/2008: Añadido el abstract
  • 02/Dic/2008: Añadido enlace a la bitácora de la lectura
  • 27/Nov/2008: Primera version de esta página