Mini-PI
Introduction
The scope of this page is to document the Mini-PI robot.
Mini-PI stands off: - Mini: The simplest robot: Miniskybot - PI: Raspberry-PI: cheapest Linux PC
The intend is to build a robot, very simple, but using the Raspeberry-PI as a main processor.
I will start writing here the steps i am following to do it. I have been so many years without building a robot, and now, i feel excited about it. During this years i have been following all Juan's publications, and i will take advantage of all of them: 3D printers, python, Skymega, ...
I am living in California now, that is one of the reasons i am writing this in english, another, is because i would like to present this in my son's class in the school. The knew about my background in robotics and they would like me to present something. They have a strong team in Lego Mindstorms http://mindstorms.lego.com
Raspberry-PI
I bought the Raspberry-PI here: http://www.alliedelec.com/images/products/mkt/pb/rasp/rasp.aspx
There are two models A and B. In my case i bought the B because i wanted it to have Ethernet on the board. Option A is not a bad idea if you don't consider using the ETH, for example using model A, with a USB-Wifi module is not a bad alternative.
Skypic Planos Esquemático, PCB y ficheros de fabricación | |
Sky293 Planos Esquemático, PCB y ficheros de fabricación |
Autores
Licencia
This work is licensed under a Creative Commons Attribution-ShareAlike 2.5 Spain License. |
Noticias
- 11/Mayo/2013: Creation of the page