Diferencia entre revisiones de «OpenMR: Servocontroller examples»
De WikiRobotics
(→Test-servocontroller-1: Set the position of one servo) |
(→Test-servocontroller-1: Set the position of one servo) |
||
Línea 2: | Línea 2: | ||
== Test-servocontroller-1: Set the position of one servo == | == Test-servocontroller-1: Set the position of one servo == | ||
− | Example of the '''setpos1''' command to set the position of the servo 0 | + | Example of the '''setpos1''' command to set the position of the servo 0. The module's angle is set to 45 and -45 degrees alternatively. |
+ | |||
+ | In the begining the environmnet is created (loaded from the file models/Unimod1.env.xml) and the camera view is set. The environment consist of one robot with only one module (Unimod). | ||
+ | |||
+ | First the pointer to the robot is obtained from the environment ('''penv'''). In a general scence, there can be multiple robots. But in this example there is only one robot (robot number 0): | ||
+ | |||
+ | std::vector<RobotBasePtr> robots; | ||
+ | penv->GetRobots(robots); | ||
+ | RobotBasePtr probot = robots[0]; | ||
+ | |||
+ | |||
{| | {| |
Revisión del 03:42 7 jul 2010
Contenido
Introduction
Test-servocontroller-1: Set the position of one servo
Example of the setpos1 command to set the position of the servo 0. The module's angle is set to 45 and -45 degrees alternatively.
In the begining the environmnet is created (loaded from the file models/Unimod1.env.xml) and the camera view is set. The environment consist of one robot with only one module (Unimod).
First the pointer to the robot is obtained from the environment (penv). In a general scence, there can be multiple robots. But in this example there is only one robot (robot number 0):
std::vector<RobotBasePtr> robots; penv->GetRobots(robots); RobotBasePtr probot = robots[0];