Diferencia entre revisiones de «Mini-cajones organizadores»
De WikiRobotics
(→Fotos) |
(→Descarga) |
||
| Línea 13: | Línea 13: | ||
{| {{tablabonita}} | {| {{tablabonita}} | ||
|- | |- | ||
| − | | [] | + | | [https://github.com/Obijuan/3D-parts/raw/master/compartment-box/compartment-box.scad compartment-box.scad] |
| − | | | + | | Fuentes en Openscad |
|------- | |------- | ||
| − | | [] | + | | [https://github.com/Obijuan/3D-parts/raw/master/compartment-box/STL/cabinet.stl cabinet.stl] |
| − | | Fichero STL para | + | | Fichero STL. Cuerpo para meter 2 cajones |
|------- | |------- | ||
| − | | [] | + | | [https://github.com/Obijuan/3D-parts/raw/master/compartment-box/STL/drawer_1x1.stl drawer_1x1.stl] |
| − | | | + | | Fichero STL. Cajón con 1 compartimento |
| + | |------- | ||
| + | | [https://github.com/Obijuan/3D-parts/raw/master/compartment-box/STL/drawer_2x1.stl drawer_2x1.stl] | ||
| + | | Fichero STL. Cajón con 2 compartimentos | ||
| + | |------- | ||
| + | | [https://github.com/Obijuan/3D-parts/raw/master/compartment-box/STL/drawer_2x2.stl drawer_2x2.stl] | ||
| + | | Fichero STL. Cajón con 4 compartimentos | ||
|} | |} | ||
Revisión del 10:05 30 abr 2013
| [ Thingiverse] | Github |
|---|
Introducción
Descarga
| compartment-box.scad | Fuentes en Openscad |
| cabinet.stl | Fichero STL. Cuerpo para meter 2 cajones |
| drawer_1x1.stl | Fichero STL. Cajón con 1 compartimento |
| drawer_2x1.stl | Fichero STL. Cajón con 2 compartimentos |
| drawer_2x2.stl | Fichero STL. Cajón con 4 compartimentos |
Fotos
| Album de fotos |
|---|
Repositorio
Autor
Licencia
 This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Spain License.
|
Enlaces
Noticias
- 30/Abril/2013: Comenzada esta página
