Diferencia entre revisiones de «OpenMR: Servocontroller examples»
(→Test-servocontroller-1: Set the position of one servo) |
(→Example 2: Set the position of two servos) |
||
Línea 39: | Línea 39: | ||
{| | {| | ||
− | | [[|thumb|300px|'''Test-servocontroller-2''': Servo positions set to -45 degrees (''click to enlarge'')]] | + | | [[Imagen:Openmr-test-servocontroller-2-1.jpg|thumb|300px|'''Test-servocontroller-2''': Servo positions set to 45 and -45 degrees (''click to enlarge'')]] |
− | | [[|thumb|300px|'''Test-servocontroller-2''': Servo positions set to 45 degrees (''click to enlarge'')]] | + | | [[Imagen:Openmr-test-servocontroller-2-2.jpg|thumb|300px|'''Test-servocontroller-2''': Servo positions set to -45 and 45 degrees (''click to enlarge'')]] |
|} | |} | ||
− | |||
== Links == | == Links == |
Revisión del 03:59 7 jul 2010
Contenido
Introduction
Test-servocontroller-1: Set the position of one servo
Example of the setpos1 command to set the position of the servo 0. The module's angle is set to 45 and -45 degrees alternatively.
In the begining the environmnet is created (loaded from the file models/Unimod1.env.xml) and the camera view is set. The environment consist of one robot with only one module (Unimod).
First the pointer to the robot(probot) is obtained from the environment (penv). In a general scence, there can be multiple robots. But in this example there is only one robot (robot number 0):
std::vector<RobotBasePtr> robots; penv->GetRobots(robots); RobotBasePtr probot = robots[0];
Then the servocontroller is set as the robot controller:
ControllerBasePtr pcontroller = penv->CreateController("servocontroller"); probot->SetController(pcontroller,"");
In the main loop, the serpos1 command is used to set the module's angle:
while(1) { is << "setpos1 0 45 "; pcontroller->SendCommand(os,is); sleep(1); is << "setpos1 0 -45 "; pcontroller->SendCommand(os,is); sleep(1); }
Example 2: Set the position of two servos
Example of the setpos and setpos1 commands to set the position of two servos. Both modul angles are set to 45 and -45 degrees alternatively.