Diferencia entre revisiones de «Freecad: Octopus Pulsador»
De WikiRobotics
(→Descarga) |
(→Descarga) |
||
| Línea 13: | Línea 13: | ||
{| {{tablabonita}} | {| {{tablabonita}} | ||
|- | |- | ||
| − | | [https://github.com/Obijuan/printbot_part_library/raw/master/sensors/octopus/octopus- | + | | [https://github.com/Obijuan/printbot_part_library/raw/master/sensors/octopus/octopus-pushbutton.fcstd octopus-pushbutton.fcstd] |
| Octopus Pulsador (Freecad) | | Octopus Pulsador (Freecad) | ||
|------- | |------- | ||
| − | | [] | + | | [https://github.com/Obijuan/printbot_part_library/raw/master/sensors/octopus/step-stl/octopus-pushbutton.stp octopus-pushbutton.stp] |
| Octopus Pulsador (STEP) | | Octopus Pulsador (STEP) | ||
|------- | |------- | ||
| − | | [] | + | | [https://github.com/Obijuan/printbot_part_library/raw/master/sensors/octopus/step-stl/octopus-pushbutton.stl octopus-pushbutton.stl] |
| Octopus Pulsador (STL) | | Octopus Pulsador (STL) | ||
|------- | |------- | ||
Revisión actual del 13:03 29 ago 2014
| Github |
|---|
Introducción
Modelo 3D del octopus pulsador. Incluido en la caja x de mi primer kit de robótica de bq. Modelado con Freecad 0.14
Descarga
| octopus-pushbutton.fcstd | Octopus Pulsador (Freecad) |
| octopus-pushbutton.stp | Octopus Pulsador (STEP) |
| octopus-pushbutton.stl | Octopus Pulsador (STL) |
Fotos
| Álbum de fotos |
|---|
Repositorio
Autor
Licencia
 This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Spain License.
|
Enlaces
Noticias
- 28/Agosto/2014: Publicada primera versión de esta página
